Expert Answers about Ford Hose Hanger

• Does The MORryde Suspension Upgrade Kit # MR58ZR Contain Wet Bolts For All The Hangers?
• Yes, the MORryde Suspension Upgrade Kit # MR58ZR does include wet bolts for the front, rear and center hangers as well as the the wet bolts for the shackles. Do be sure you have the correct track style hangers as this kit has the longer bolts those hangers require. If you do not have correct track hangers you want to use the Kit # MR46ZR as it has the shorter bolts for standard hangers. I recommend using the Grease # L11390 with a grease gun like the # L30416 which makes it easier access...
  view full answer...


• Draw-Tite Hitch Rattles on 2017 Subaru Forester with Dual Exhaust
• In regards to trailer hitch vibrations like with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76182 on a 2017 Subaru Forester, we typically recommend bending the hangers for the exhaust away from the hitch slightly which in most cases, gets rid of the rattle. I have attached for you below a help article we did to help others with the same issue. If this does not fix the problem, you could possibly use some rubber hose split in half to place on the bottom of the hitch flange to...
  view full answer...


• Does Flipping a Single Axle Cause a Drastic Change in Tongue Height
• The tongue height of your trailer is going to increase in relation to the amount of lift gained from the Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 for 3" axles or part # K71-384-00 for 2-3/8" axles. The amount of height you gain will be equal to the diameter of the axle plus the height of the leaf spring seat and stack. Basically, the over under kit raises the trailer's frame and since the coupler is attached to the frame, it is going to raise that as well. In...
  view full answer...